| |
- Products
-
Applications
-
- Automotive, Electronics, Semiconductor, Food & Beverage, Packaging
-
- Medical, Microscopy, Robotics, Pharmaceutical, Astronomy, Sports & Motion
- Land Surveying, Infrastructure Management, Mapping, Street View
- ITS, Enforcement, Tolling, Biometrics, Security & Safety
- Broadcasting, Interactive Multimedia, 3D Video Capture
-
SUPPORT
-
NEWS
-
CORPORATE
|
|
|
|
- Overview
- Specifications
- Documents
- Models
- Pricing
| Flea®2 |
|
|
At 29x29x30mm, the Flea®2 is even smaller than the original Flea camera and is designed to have the form factor of similar industry standard analog cameras. The 800Mb/s interface enables full frame rate RGB image transmission and even more cameras on the same bus. The IEEE-1394b cable with jack screws allows a more secure connection to the camera.
|
|
| Sensor: Sony 1/3", 1/2", 1/1.8", 2/3" CCDs, Color/BW |
| Resolution: 0.3, 0.8, 1.3, 1.4, 2.0, 5.0 Megapixels |
| Frame Rate: 7.5 FPS (FL2G-50S5) to 80FPS (FL2-03S2) |
| Dimensions: 29 x 29 x 30 mm |
| Interface: 9-pin IEEE-1394b 800Mb/s interface |
 Flea2 Product Datasheet
|
|
"C/M" indicates both monochrome and color sensor options are available for this part number. Full part numbers are available here http://www.ptgrey.com/sales/models.asp.
| SPECS |
FL2-
03S2M/C |
FL2-
08S2M/C |
FL2-
14S3M/C |
FL2-
20S4M/C |
FL2G-
13S2M/C |
FL2G-
50S5M/C |
|
Image Sensor Type |
Sony progressive scan interline transfer CCD’s with square pixels and global shutter, monochrome or color |
|
Image Sensor Model |
Sony ICX424 1/3” |
Sony ICX204 1/3” |
Sony ICX267
1/2” |
Sony ICX274 1/1.8” |
ICX445 1/3” EXview HAD CCD™ |
ICX655 2/3 SuperHAD CCD™ |
|
Maximum Resolution |
648x488 |
1032x776 |
1392x1032 |
1624x1224 |
1288x964 |
2448x2048 |
|
Pixel Size |
7.4 x 7.4µm |
4.65 x 4.65µm |
4.65 x 4.65µm |
4.4 x
4.4µm |
3.75 x 3.75µm |
3.45 x 3.45µm |
|
Analog-to-Digital Converter |
Analog Devices 12-bit ADC |
|
Video Data Output |
8, 12, 16 and 24-bit digital data |
|
Image Data Formats |
Y8, Y16 (all models), RGB, YUV411, YUV422, YUV444, 8-bit and 16-bit raw Bayer data (color models) |
|
Color Processing |
On-camera in YUV or RGB format, or on-PC in Raw format |
|
Digital Interface |
Bilingual 9-pin IEEE-1394b for camera control, video data transmission, and power |
|
Transfer Rates |
100, 200, 400, 800 Mbit/s |
Maximum
Frame Rate |
648x488 at 80FPS |
1032x776 at 30FPS |
1392x1032 at 15FPS |
1624x1224 at 15FPS |
1288x964 at 30FPS |
2448x2048 at 7.5FPS |
|
Partial Image Modes |
pixel binning and region of interest modes via Format_7 |
|
White Balance |
automatic / manual / one-push modes, programmable via software |
|
General Purpose I/O Ports |
8-pin Hirose HR25 GPIO connector
opto-isolated pins for trigger and strobe (FL2G models only), bi-directional pins for trigger, strobe or serial port |
|
Gain Control |
automatic / manual / one-push gain modes, programmable via software, 0dB to 24dB in 0.04dB increments |
|
Shutter Speed |
automatic / manual / one-push modes, programmable via software, 0.02ms to greater than 10s (extended shutter mode) |
|
Gamma/LUT |
0.50 to 4.00 / programmable lookup table |
|
Synchronization |
via external trigger, software
trigger (on same bus only), or free-running |
|
External Trigger Modes |
DCAM v1.31 Trigger Modes 0, 1, 3, 4 and 5 (multiple exposure, 03S2 and 08S2 models only), 14 (overlapped trigger), and 15 (multi-shot trigger) |
|
Power Consumption |
power via Vext GPIO pin or 9-pin 1394b interface: 8 to 30 V, less than 2.5 W |
Dimensions
(L x W x H) |
29mm x 29mm x 30mm (excluding lens holder, without optics) |
|
Mass |
58g (without optics) |
|
Memory Storage |
(FL2G models only) 32MB frame buffer, 512KB non-volatile data flash |
|
Memory Channels |
3 memory channels for custom camera settings |
|
Camera Specification |
IIDC 1394-based Digital Camera Specification v1.31, compatible with IEEE-1394b and IEEE-1394a interfaces |
|
Lens Mount |
C-mount |
|
Emissions Compliance |
Complies with CE rules and Part 15 Class B of FCC Rules |
|
Operating Temperature |
0° to 45°C |
|
Storage Temperature |
-30° to 60°C |
|
Warranty |
2 year |
Development Kit Contents
The following items are included in the Flea2 / Flea3 / Grasshopper / Grasshopper2 / Grasshopper Express / (1394b models only) Development Accessory Kit DEVKIT-01-0001:
- ACC-01-2006: 4.5 meter, 9-pin to 9-pin locking IEEE-1394b cable
- ACC-01-2007: 4.5 meter, 6-pin to 9-pin locking IEEE-1394a to 1394b cable
- ACC-01-1001: IEEE-1394b OHCI PCI Host Adapter 2 Port 800Mbps card
- ACC-01-3000: Hirose HR25 8-pin male GPIO connector with 1m wiring harness
The following items are included in the Flea2 / Flea3 / Grasshopper / Grasshopper2 / Grasshopper Express / (1394b models only) Development Accessory Kit DEVKIT-01-0002:
- ACC-01-2006: 4.5 meter, 9-pin to 9-pin locking IEEE-1394b cable
- ACC-01-2007: 4.5 meter, 6-pin to 9-pin locking IEEE-1394a to 1394b cable
- FWB-PCIE-01: FirePRO low profile single bus IEEE-1394b PCI Express card
- ACC-01-3000: Hirose HR25 8-pin male GPIO connector with 1m wiring harness
Emissions and RoHS Compliance
FCC / CE Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
RoHS / WEEE Compliance
This product is RoHS and WEEE compliant.
| Part Number |
Description |
| FL2-03S2C-C |
648x488 Color Flea2, C-mount, Sony ICX424 CCD |
| FL2-03S2M-C |
648x488 Mono Flea2, C-mount, Sony ICX424 CCD |
| FL2-08S2C-C |
1032x776 Color Flea2, C-mount, Sony ICX204 CCD |
| FL2-08S2M-C |
1032x776 Mono Flea2, C-mount, Sony ICX204 CCD |
| FL2-14S3C-C |
1392x1032 Color Flea2, C-mount, Sony ICX267 CCD |
| FL2-14S3M-C |
1392x1032 Mono Flea2, C-mount, Sony ICX267 CCD |
| FL2-20S4C-C |
1624x1224 Color Flea2, C-mount, Sony ICX274 CCD |
| FL2-20S4M-C |
1624x1224 Mono Flea2, C-mount, Sony ICX274 CCD |
| FL2G-13S2C-C |
1296x964 Color Flea2, C-mount, Sony ICX445 CCD |
| FL2G-13S2M-C |
1296x964 Mono Flea2, C-mount, Sony ICX445 CCD |
| FL2G-50S5C-C |
2448x2048 Color Flea2, C-mount, Sony ICX655 CCD |
| FL2G-50S5M-C |
2448x2048 Mono Flea2, C-mount, Sony ICX655 CCD |
| DEVKIT-01-0001 |
Development Accessory Kit with 1394b 64-bit PCI card |
| DEVKIT-01-0002 |
Development Accessory Kit with FirePRO 1394b PCI Express card |
| View a list of all Point Grey camera accessories, optics, cards and cables |
NOTES:
- First time users are required to purchase a Development Accessory Kit in addition to purchasing the initial camera.
- Individual Flea2 cameras do not include optics (lenses).
- Individual Flea2 cameras do include a tripod mounting adapter.
|
|
|
|
|
|
View catalog
