SPECS

FL2- 03S2M/C

FL2- 08S2M/C

FL2- 14S3M/C

FL2- 20S4M/C

FL2G- 13S2M/C

FL2G- 50S5M/C

Image Sensor Type

Sony progressive scan interline transfer CCD’s with square pixels and global shutter, monochrome or color

Image Sensor Model	Sony ICX424 1/3”	Sony ICX204 1/3”	Sony ICX267 1/2”	Sony ICX274 1/1.8”	ICX445 1/3” EXview HAD CCD™	ICX655 2/3 SuperHAD CCD™
Maximum Resolution	648x488	1032x776	1392x1032	1624x1224	1296x964	2448x2048
Pixel Size	7.4 x 7.4µm	4.65 x 4.65µm	4.65 x 4.65µm	4.4 x 4.4µm	3.75 x 3.75µm	3.45 x 3.45µm

Analog-to-Digital Converter	Analog Devices 12-bit ADC
Video Data Output	8, 12, 16 and 24-bit digital data
Image Data Formats	Y8, Y16 (all models), RGB, YUV411, YUV422, YUV444, 8-bit and 16-bit raw Bayer data (color models)
Color Processing	On-camera in YUV or RGB format, or on-PC in Raw format
Digital Interface	Bilingual 9-pin IEEE-1394b for camera control, video data transmission, and power
Transfer Rates	100, 200, 400, 800 Mbit/s

Maximum Frame Rate

648x488 at 80FPS

1032x776 at 30FPS

1392x1032 at 15FPS

1624x1224 at 15FPS

1296x964 at 30FPS

2448x2048 at 7.5FPS

Partial Image Modes	pixel binning and region of interest modes via Format_7
White Balance	automatic / manual / one-push modes, programmable via software
General Purpose I/O Ports	8-pin Hirose HR25 GPIO connector opto-isolated pins for trigger and strobe (FL2G models only), bi-directional pins for trigger, strobe or serial port
Gain Control	automatic / manual / one-push gain modes, programmable via software, 0dB to 24dB in 0.04dB increments
Shutter Speed	automatic / manual / one-push modes, programmable via software, 0.02ms to greater than 10s (extended shutter mode)
Gamma/LUT	0.50 to 4.00 / programmable lookup table
Synchronization	via external trigger, software trigger, or free-running
External Trigger Modes	DCAM v1.31 Trigger Modes 0, 1, 3, 4 and 5 (multiple exposure, 03S2 and 08S2 models only), 14 (overlapped trigger), and 15 (multi-shot trigger)
Power Consumption	power via Vext GPIO pin or 9-pin 1394b interface: 8 to 30 V, less than 2.5 W
Dimensions (L x W x H)	29mm x 29mm x 30mm (excluding lens holder, without optics)
Mass	58g (without optics)
Memory Storage	(FL2G models only) 32MB frame buffer, 512KB non-volatile data flash
Memory Channels	3 memory channels for custom camera settings
Camera Specification	IIDC 1394-based Digital Camera Specification v1.31, compatible with IEEE-1394b and IEEE-1394a interfaces
Lens Mount	C-mount
Emissions Compliance	Complies with CE rules and Part 15 Class B of FCC Rules
Operating Temperature	0° to 45°C
Storage Temperature	-30° to 60°C
Warranty	2 year

Development Kit Contents
The following items are included in the Flea2 / Grasshopper Development Accessory Kit DEVKIT-01-0001:

• ACC-01-2006: 4.5 meter, 9-pin to 9-pin locking IEEE-1394b cable
• ACC-01-2007: 4.5 meter, 6-pin to 9-pin locking IEEE-1394a to 1394b cable
• ACC-01-1001: IEEE-1394b OHCI PCI Host Adapter 2 Port 800Mbps card
• ACC-01-3000: Hirose HR25 8-pin male GPIO connector with 1m wiring harness
• FlyCapture SDK (C/C++ API and device drivers) CD
• Flea2 and Grasshopper Getting Started Manuals

The following items are included in the Flea2 / Grasshopper Development Accessory Kit DEVKIT-01-0002:

• ACC-01-2006: 4.5 meter, 9-pin to 9-pin locking IEEE-1394b cable
• ACC-01-2007: 4.5 meter, 6-pin to 9-pin locking IEEE-1394a to 1394b cable
• FWB-PCIE-01: FirePRO low profile single bus IEEE-1394b PCI Express card
• ACC-01-3000: Hirose HR25 8-pin male GPIO connector with 1m wiring harness
• FlyCapture SDK (C/C++ API and device drivers) CD
• Flea2 and Grasshopper Getting Started Manuals

Emissions and RoHS Compliance

FCC / CE Compliance

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

RoHS / WEEE Compliance

This product is RoHS and WEEE compliant.

Technical Documents	White Papers
Product Datasheet  Getting Started Manual  Technical Reference Manual (Login Required) Benefits of IEEE-1394b (FireWire S800)	Transitioning from Flea to Flea2 GPIO functionality in FL2G-xx models Sony ICX445 CCD comparison FL2G-50S5 and GRAS-50S5 comparison

Related Imaging Product Documents

Compare Imaging Product features and specifications
Download the Imaging Product camera catalog | View catalog
Download the FirePRO FireWire components catalog

Related Articles

Application Notes:
TAN2009002 - Comparing the Flea2 and Flea2G Digital Imaging Cameras
TAN2008008 - FL2G-50S5M & GRAS-50S5M imaging comparison
TAN2008004 - New GPIO functionality in Flea2 FL2G-xx models
TAN2006005 - Transitioning from the Flea to the Flea2

Case Studies:
FireWire camera-based 3-D imaging of the bow in solar cells
FireWire Camera Removes Bottlenecks in Astroimaging
From Air Hockey to Bin Picking
Vision System For Bottle Cap Inspection
Large Driverless Truck Uses Small Flea2 Cameras for Vision
Desktop Wire Bond Machine
Adding a Third Dimension to Parts Inspection

Part Number	Description
FL2-03S2C-C	648x488 Color Flea2, C-mount, Sony ICX424 CCD
FL2-03S2M-C	648x488 B&W Flea2, C-mount, Sony ICX424 CCD
FL2-08S2C-C	1032x776 Color Flea2, C-mount, Sony ICX204 CCD
FL2-08S2M-C	1032x776 B&W Flea2, C-mount, Sony ICX204 CCD
FL2-14S3C-C	1392x1032 Color Flea2, C-mount, Sony ICX267 CCD
FL2-14S3M-C	1392x1032 B&W Flea2, C-mount, Sony ICX267 CCD
FL2-20S4C-C	1624x1224 Color Flea2, C-mount, Sony ICX274 CCD
FL2-20S4M-C	1624x1224 B&W Flea2, C-mount, Sony ICX274 CCD
FL2G-13S2C-C	1296x964 Color Flea2, C-mount, Sony ICX445 CCD
FL2G-13S2M-C	1296x964 B&W Flea2, C-mount, Sony ICX445 CCD
FL2G-50S5C-C	2448x2048 Color Flea2, C-mount, Sony ICX655 CCD
FL2G-50S5M-C	2448x2048 B&W Flea2, C-mount, Sony ICX655 CCD
DEVKIT-01-0001	Development Accessory Kit with 1394b 64-bit PCI card
DEVKIT-01-0002	Development Accessory Kit with FirePRO 1394b PCI Express card
Download a list of available accessories for this model
NOTES: First time users are required to purchase a Development Accessory Kit in addition to purchasing the initial camera. Individual Flea2 cameras do not include optics (lenses). Individual Flea2 cameras do include a tripod mounting adapter.