- Overview
- Specifications
- Documents
- Models
- Pricing
| Flea®3 (IEEE 1394b) |
|
|
The fully redesigned, next generation Flea3 camera series builds on the success of the ultra-compact Flea2 by adding new Sony image sensors to the line-up and a choice of IEEE 1394b (FireWire) or GigE Vision digital
interface. Measuring just 29 x 29 x 30 mm and weighing only 58 grams, the Flea3 has the same small, lightweight
form factor as many industry-standard “ice cube” analog cameras. The Flea3 also offers a host of new features,
including enhanced opto-isolated GPIO; an on-camera frame buffer; non-volatile user data storage; new trigger
modes; and improved imaging performance.
|
|
| Sensor: Sony 1/2", 1/4", 1/1.8", CCDs, Color/BW |
| Resolution: 0.3, 1.4, 2.0 Megapixels |
| Frame Rate: 15 FPS (FL3-20S4) to 120 FPS (FL3-03S1) |
| Dimensions: 29 x 29 x 30 mm |
| Interface: 9-pin IEEE-1394b 800Mb/s interface |
Flea3 Product Datasheet
|
|
"C/M" indicates both monochrome and color sensor options are available for this part number. Full part numbers are available here http://www.ptgrey.com/sales/models.asp.
|
Flea3 Model# |
FL3-FW-
03S1M/C-C |
FL3-FW-
03S3M/C-C |
FL3-FW-14S3M/C-C |
FL3-FW-
20S4M/C-C |
|
Image Sensor Type |
Sony progressive scan interline transfer CCD’s with square pixels and global shutter, monochrome or color |
|
Image Sensor Model |
ICX618 1/4” |
ICX414
1/2” |
ICX267
1/2" |
ICX274 1/1.8" |
|
Maximum Resolution |
648x488 |
648x488 |
1384x
1032 |
1624x
1224 |
|
Maximum
FPS |
120FPS |
76FPS |
16FPS |
15FPS |
|
Pixel Size |
5.6 x 5.6µm |
9.9 x 9.9µm |
4.65 x 4.65µm |
4.4 x 4.4µm |
|
Analog/Digital Converter |
Analog Devices 12-bit ADC |
|
Video Data Output |
8, 12, 16 and 24-bit digital data |
|
Image Data Formats |
Y8, Y16 (all models), RGB, YUV411, YUV422, 8-bit and 16-bit raw Bayer data (color models) |
|
Color Processing |
On-camera in YUV or RGB format, or on-PC in Raw format |
|
Digital Interface |
IEEE 1394b interface with screw locks for camera control, data, and power |
|
Transfer Rates |
100, 200, 400, 800 Mbit/s |
|
Partial Image Modes |
pixel binning and region of interest modes via Format_7 |
|
White Balance |
automatic / manual modes, programmable via software |
|
General Purpose I/O Ports |
8-pin Hirose HR25 GPIO connector
opto-isolated pins for trigger, pwm and strobe, bi-directional pins for trigger, strobe, pwm or serial port |
|
Gain Control |
automatic / manual / one-push gain modes, programmable via software, 0dB to 24dB in 0.04dB increments |
|
Shutter Speed |
automatic / manual / one-push modes, programmable via software, 0.03ms to greater than 25s (extended shutter mode) |
|
Gamma/LUT |
0.50 to 4.00 / programmable lookup table |
|
Synchronization |
via external trigger, software
trigger (on same bus only), or free-running |
|
External Trigger Modes |
DCAM v1.32 Trigger Modes 0, 1, 3, 4, 5, 14 (overlapped trigger), and 15 (multi-shot trigger) |
|
Power Consumption |
power via Vext GPIO pin or 9-pin 1394b interface: 8 to 30 V,
less than 2.5 W |
Dimensions
(L x W x H) |
29mm x 29mm x 30mm (excluding lens holder, without optics) |
|
Mass |
58g (without optics) |
|
Memory Storage |
32MB frame buffer, 1MB non-volatile data flash |
|
Memory Channels |
2 memory channels for custom camera settings |
|
Camera Specification |
IIDC 1394-based Digital Camera Specification v1.32
|
|
Lens Mount |
C-mount |
|
Emissions Compliance |
Complies with CE rules and Part 15 Class A of FCC Rules |
|
Operating Temperature |
0° to 45°C |
|
Storage Temperature |
-30° to 60°C |
|
Warranty |
2 year |
Development Kit Contents
The following items are included in the Flea2 / Flea3 / Grasshopper / Grasshopper2 / Grasshopper Express / (1394b models only) Development Accessory Kit DEVKIT-01-0001:
- ACC-01-2006: 4.5 meter, 9-pin to 9-pin locking IEEE-1394b cable
- ACC-01-2007: 4.5 meter, 6-pin to 9-pin locking IEEE-1394a to 1394b cable
- ACC-01-1001: IEEE-1394b OHCI PCI Host Adapter 2 Port 800Mbps card
- ACC-01-3000: Hirose HR25 8-pin male GPIO connector with 1m wiring harness
The following items are included in the Flea2 / Flea3 / Grasshopper / Grasshopper2 / Grasshopper Express / (1394b models only) Development Accessory Kit DEVKIT-01-0002:
- ACC-01-2006: 4.5 meter, 9-pin to 9-pin locking IEEE-1394b cable
- ACC-01-2007: 4.5 meter, 6-pin to 9-pin locking IEEE-1394a to 1394b cable
- FWB-PCIE-01: FirePRO low profile single bus IEEE-1394b PCI Express card
- ACC-01-3000: Hirose HR25 8-pin male GPIO connector with 1m wiring harness
Emissions and RoHS Compliance
FCC / CE Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
RoHS / WEEE Compliance
This product is RoHS and WEEE compliant.
| Part Number (FireWire) |
Description |
| FL3-FW-03S1C-C |
648x488 Color Flea3, C-mount, Sony ICX618 CCD |
| FL3-FW-03S1M-C |
648x488 Mono Flea3, C-mount, Sony ICX618 CCD |
| FL3-FW-03S3C-C |
648x488 Color Flea3, C-mount, Sony ICX414 CCD |
| FL3-FW-03S3M-C |
648x488 Mono Flea3, C-mount, Sony ICX414 CCD |
| FL3-FW-14S3C-C |
1384x1032 Color Flea3, C-mount, Sony ICX267 CCD |
| FL3-FW-14S3M-C |
1384x1032 Mono Flea3, C-mount, Sony ICX267 CCD |
| FL3-FW-20S4C-C |
1624x1224 Color Flea3, C-mount, Sony ICX274 CCD |
| FL3-FW-20S4M-C |
1624x1224 Mono Flea3, C-mount, Sony ICX274 CCD |
| DEVKIT-01-0001 |
Development Accessory Kit with 1394b 64-bit PCI card |
| DEVKIT-01-0002 |
Development Accessory Kit with FirePRO 1394b PCI Express card |
| View a list of all Point Grey camera accessories, optics, cards and cables |
NOTES:
- Individual Flea3 cameras do not include optics (lenses).
- Individual Flea3 cameras do include a tripod mounting bracket.
|
|