|
SPECIFICATION |
LADYBUG2 |
|
Image Sensor Type |
six (6) Sony progressive scan color CCDs (five in horizontal ring, one on top) |
|
Image Sensor Model |
Sony 0.8 MP 1/3” ICX204 |
|
Maximum Resolution |
1024(H) x 768(V) (each sensor) |
|
Shutter Type |
global shutter |
|
Analog-to-Digital Converter |
Analog Devices 12-bit ADC |
|
Video Data Output |
8-bit raw Bayer (color) digital data |
|
Digital Interface |
9-pin 1394b (FireWire) 800Mb/s interface for camera control, power and video data
Fiber optic link between Head and Compressor |
|
Maximum Frame Rate |
30 FPS JPEG compressed, 15 FPS uncompressed |
|
Partial Image Modes |
region of interest modes via Format_7, programmable via software |
|
Optics |
six (6) high quality 2.5 mm focal length microlenses |
|
Triggering |
software only |
|
Camera Settings Control |
shutter, gain, white balance, gamma and JPEG compression, are programmable via software |
|
Voltage Requirements |
8-30 V, via the IEEE-1394b interface |
|
Power Consumption |
11.2 W at 12 V* |
|
Case Material |
machined aluminum housing, anodized red |
|
Case Type |
two units (Head and Compressor) |
|
Dimensions (L x W x H) |
110mm x 100 mm x 141mm |
|
Mass |
1190 g* |
|
Camera Status |
status LED to indicate power and device connection |
|
Camera Specification |
IIDC 1394-based Digital Camera Specification v1.31 |
|
Emissions Compliance |
complies with CE rules and Part 15 Class A of FCC Rules |
|
Operating Temperature |
0° to 45°C (-30° to 60°C storage) |
|
Warranty |
1 year |
Development Kit Contents
- Ladybug2 Camera Head Unit
- Ladybug2 Compressor Unit
- IEEE-1394b OHCI PCI Host Adapter 3-port 800Mb/s card
- 4.5 meter, 9-pin to 9-pin, IEEE-1394b cable
- 4.5 meter, 6-pin to 9-pin, IEEE-1394a to IEEE-1394b cable
- 4.5 meter, 4-pin to 9-pin, IEEE-1394a to IEEE-1394b cable
-
10 meter 62.5/125um fiber optic link cable
- 10 meter, 3-pin power link cable
- 24V 2.5A power supply with standard connector and wall wart
- Ladybug SDK, including C/C++ API and device drivers
- Getting Started manual and LadybugCap demo software
Emissions and RoHS Compliance
FCC / CE Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
RoHS / WEEE Compliance
This product is RoHS and WEEE compliant.
*NOTE: Each camera comes as a full Development Kit (get
full Kit details)
| Part Number |
Description |
| LD2-HICOL-KIT |
1024x768 Color Ladybug2 Kit |
