Point Grey imaging product part numbers are structured in the following format:

Product Family - Interface - Sensor - Optics

Sensor Designator

*in cases where two sensors share the same resolution, the number is increased by 1.  For example, the ZBR2-PGEHD-50S5C and ZBR2-PGEHD-51S5C are both 5.0 MP cameras

Examples

• FMVU-13S2C-CS: FireflyMV USB2, 1.3 MP Sony 1/3" sensor, color, CS-mount (USB interface designator is missing from this part number because it is an earlier product.)
• FL3-FW-03S1C-C: Flea3, FireWire, 0.3 MP Sony 1/4" sensor, color, C-mount
• GS2-GE-20S4M-C: Grasshopper2, Gigabit Ethernet, 2.0 MP Sony 1/1.8" sensor, monochrome, C-mount

About the Optics Designator

The -C or -CS optics designator may not appear on all product documentation. For example, on the camera box label shown below, the -C designator appears on the part number, but not on the model number. The lens mount designator may also not appear on the serial number label on the bottom of the camera, or on the etching on the side of the camera. However, the missing designator does not mean the camera is a different model from the one that was ordered. The part number and the model refer to the same camera on all product labelling. So, in the box label pictured below, part number FL2-03S2M-C and model FL2-03S2M are the same Flea2 camera, equipped with a C-mount lens holder.

For any further questions about part numbering and labelling, please contact sales@ptgrey.com.

ARTICLE FEEDBACK:

How useful was this article? less more 1 2 3 4 5 Additional comments or suggestions?