|
Issue:
This article provides the results of testing components, including cards and drivers, with Point Grey USB 3.0 cameras.
Solution:
Point Grey conducted tests on various hardware and driver components necessary for operating USB 3.0 cameras.
The complete results and test specifications can be found in the following Technical Application Note:
 TAN2011005 USB 3.0 Supported Configurations
For Host Controller Interface (HCI) Card and Driver, the following are supported:
|
xHCI Adapter |
Driver |
Version (or later) |
|
Fresco FL1009
(Sold by Point Grey) |
PGRxHCI |
2.3.3.40 |
|
Fresco/PGRUSBCam |
3.5.24.0/2.3.3.38 |
|
Renesas (NEC) µPD720200
(Sold by Point Grey) |
PGRxHCI |
2.3.3.40 |
|
Renesas (NEC)/PGRUSBCam |
2.1.14.0/2.3.3.38 |
|
AMD |
PGRxHCI |
2.3.3.40 |
|
AMD/PGRUSBCam |
1.0.0.55/2.3.3.38 |
|
Intel |
PGRxHCI |
2.3.3.40 |
|
Intel/PGRUSBCam |
1.0.5.235/2.3.3.38 |
The following are not supported:
|
xHCI Adapter |
Driver |
Version |
Reason |
|
Fresco FL1000 |
PGRxHCI |
All |
Insufficient testing |
|
Fresco FL1000 |
Fresco + PGRUSBCam |
3.0.110.12 |
Insufficient testing |
|
ASMedia |
PGRxHCI |
All |
Not yet supported |
|
Etron |
Etron or Point Grey |
All |
Not yet supported |
|
TI |
PGRxHCI |
All |
Not yet supported |
|
Via |
PGRxHCI |
All |
Not yet supported |
Related
Articles:
1.) Diagnosing USB 3.0 camera and bus errors
2.) My USB 3.0 camera does not achieve full frame rate
3.) How does my USB 3.0 camera appear in Device Manager?
4.) Key differences between USB 2.0 and USB 3.0 cameras
5.) USB 3.0 cameras on USB 2 bus do not support images >4 MB
Article
ID: |
384 |
| Published: |
3/12/2012 12:15:07 PM |
Last
Modified: |
10/16/2012 10:40:07 AM |
| Keywords: |
USB3, USB 3.0, card, host controller interface, driver, bus |
|