"C/M" indicates both monochrome and color sensor options are available for this part number. Full part numbers are available here http://www.ptgrey.com/sales/models.asp.
| SPECIFICATION |
CMLN-13S2M/C-CS |
| Image Sensor Type |
Sony progressive scan interline transfer CCD’s with square
pixels and global shutter |
| Image Sensor Model |
ICX445 1/3” EXview HAD CCD™ |
| Maximum Resolution |
1296(H) x 964(V) |
| Pixel Size |
3.75μm x 3.75μm |
| Analog-to-Digital
Converter |
Analog Devices 12-bit ADC |
| Video Data Output |
8, and 16-bit digital data |
| Image Data Formats |
Y8, Y16 (monochrome), 8-bit and 16-bit raw Bayer data
(color models) |
| Digital Interface |
5-pin Mini-B USB 2.0 digital interface for camera control,
video data transmission, and power |
| Transfer Rates |
480 Mbit/s |
| Maximum Frame Rate |
1296x964 Y8 at 18 FPS |
| Partial Image Modes |
pixel binning and region of interest modes via Format_7 |
| General Purpose I/O
Ports |
7-pin JST GPIO connector, 4 pins for trigger and strobe, 1
pin +3.3 V, 1 VEXT pin for external power> |
| Gain Control |
automatic / manual / one-push gain modes, programmable via
software, 0 dB to 24 dB in 0.04 dB increments > |
| Shutter Speed |
automatic / manual / one-push modes, programmable via
software, 0.01 ms to greater than 10 seconds |
| Synchronization |
via external trigger or software trigger |
| External Trigger
Modes |
DCAM v1.31 Trigger Modes 0, 1 (bulb trigger), 3, and 14
(overlapped trigger and transfer) |
| Voltage Requirements |
4.745 to 5.25 V via the Mini B USB 2.0 interface or JST
7-pin GPIO connector |
| Power Consumption |
2 W (max) at 5 V |
Dimensions
(L x W x
H) |
25.5 mm x 44 mm x 41 mm (excluding optics) |
| Mass |
37 grams (including tripod mounting bracket) |
| Memory Storage |
3 memory channels for custom camera settings |
| Lens Mount |
CS-mount (5mm C-mount adapter included) |
| Emissions Compliance |
Complies with CE rules and Part 15 Class B of FCC Rules |
| Operating Temperature |
0° to 45°C |
| Storage Temperature |
-30° to 60°C |
| Warranty |
1 year |
|
Development Kit Contents
The following items are included in the Development Accessory Kit DEVKIT-01-0003:
Emissions and RoHS Compliance
FCC / CE Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off or on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
RoHS / WEEE Compliance
This product is RoHS and WEEE compliant.
View catalog
