| Image Acquisition |
- 12-bit analog-to-digital converter
- Multiple cameras on the same 1394 bus automatically sync
- Faster standard frame rates, pixel binning and ROI
- Bulb-trigger mode, standard trigger mode
- Overlapped trigger input, image acquisition and transfer
|
| Image Processing |
- On-camera control of gamma and LUT
support
- Pixels contain frame-specific info (e.g. 1394 cycle time)
|
| Camera and Device Control |
- Broadcast settings to all cameras on the same bus
- Fine-tune frame rates for video conversion (e.g. PAL, NTSC)
- Configurable strobe pattern output
- General purpose input/output pins for external device control
- Provides serial communication via GPIO digital logic levels
- Firmware upgradeable in field via IEEE-1394 interface.
|
Development Kit Contents
- 4.5 meter, 6-pin, IEEE-1394 cable with ferrites
- IEEE-1394 OHCI PCI Host Adapter 3 port-400 Mbps card
- Tripod mounting adapter
- Hirose HR10 12-pin male GPIO connector prewired for easy triggering
- FlyCapture C/C++ SDK and device drivers
Emissions and RoHS Compliance
FCC / CE Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off or on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
RoHS / WEEE Compliance
This product is RoHS and WEEE compliant.
*NOTE: One full KIT (get
details) must be purchased prior
to ordering individual cameras
| Part Number |
Description |
| SCOR-20SOM-CS |
1600x1200 CCD B&W Scorpion Camera |
| SCOR-20SOC-CS |
1600x1200 CCD Color Scorpion Camera |
| SCOR-14SOM-CS |
1360x1024 CCD B&W Scorpion Camera |
| SCOR-14SOC-CS |
1360x1024 CCD Color Scorpion Camera |
| SCOR-03SOM-CS |
640x480 CCD B&W Scorpion Camera |
| SCOR-03KDM-CS |
640x480 CMOS B&W Scorpion Camera |
| SCOR-03KDC-CS |
640x480 CMOS Color Scorpion Camera |
| SCOR-13FFM-CS |
1280x1024 CMOS B&W Scorpion Camera |
| SCOR-13FFC-CS |
1280x1024 CMOS Color Scorpion Camera |
| SCOR-DEVKIT |
Scorpion Development
Accessory Kit |
 Download a list of available accessories for this model |
NOTES:
- First time users are required to purchase a Development Accessory Kit in addition to purchasing the initial camera.
- Individual Scorpion cameras are not sold with optics.
|
View catalog
