- Overview
- Specifications
- Documents
- Models
- Pricing
| Zebra®2 (HD-SDI / GigE Vision) |
|
|
**Coming Soon**
For advanced traffic and surveillance applications where traditional CCTV or analog quality is insufficient, system designers are relying more and more on machine vision cameras. Point Grey, a recognized leader in machine vision, has created a camera specifically for traffic and surveillance applications. The Zebra2 retains the technical advances inherent to high-end machine
vision cameras while providing the flexibility to be used in a wide variety of traffic and surveillance applications.
Model availability: Refer to the Specifications tab for model availability.
 Enter the interactive Zebra2 Flash page
View the Zebra2 promo video
|
|
| Sensor: Sony CCD and CMOS sensors |
| Resolution: 2.0, 3.2, 5.0 Megapixels |
| Frame Rates: 30 FPS (2.0MP), 25 FPS (3.2MP), 15 FPS (5.0MP) |
| Dimensions: 44 x 44 x 87.5 mm |
| Alarm/Event Trigger: 6-pin GPIO |
| Interfaces: HD-SDI (2.97 Gbs/s) and GigE Vision (1000Mb/s, PoE) |
 Zebra2 Preliminary Datasheet
|
|
|
SPECS |
ZBR2-POGEHD-20S4C-CS |
ZBR2-POGEHD-32S2C-CS | ZBR2-POGEHD-50S5C-CS |
| Image Sensor |
Sony CCD and CMOS sensors |
|
Image Sensor Model |
ICX274 CCD 1/1.8"
Global Shutter |
IMX036 CMOS 1/2.8"
Rolling Shutter with Global Reset |
ICX625 CCD 2/3"
Global Shutter |
|
Maximum Resolution |
1624 x 1224 |
2080 x 1552 |
2448 x 2048 |
|
Maximum
Frame Rate |
30FPS |
25FPS |
15FPS |
|
Pixel Size |
4.4 x 4.4 μm |
2.5 x 2.5 μm |
3.45 x 3.45 μm |
|
Data Interface |
Gigabit Ethernet 100/1000 BASE-T interface with screw locks for camera control and video (Power over Ethernet optional),
HD-SDI up to 2.97 Gbit/s for video
|
|
Analog/Digital Converter |
14-bit ADC |
|
Image Data Formats |
Raw8, Raw12, Raw16, RGB, YUV411, YUV422, JPEG Image Compression |
|
Image Compression |
MJPEG with multiple compression levels |
|
Data Transport Protocols |
GVSP, RTSP, HD-SDI |
|
Partial Image Modes |
HD-SDI supports standard SMPTE formats , RTSP/GVSP supports binned, reduced resolution for increased framerate |
|
Trigger Modes |
External hardware or software trigger.
Standard, bulb shutter, multi-shot, and smear reduction trigger modes |
|
Gain Control |
Automatic / manual / one-push gain modes, programmable via software up to 24 dB |
|
Exposure Control |
Automatic / manual / one-push extended shutter modes, programmable via software or synchronized to external trigger |
|
High Dyunamic Range |
Cycle 4 gain and exposure presets |
|
Image Processing |
Gamma, lookup table, hue, saturation and sharpness |
|
Memory Storage |
32 MByte frame buffer; 2 user configuration sets |
Dimensions
(L x W x H) |
44 x 44 x 87.5 mm (excluding lens holder and connectors) |
|
Lens Mount |
CS-mount with hand-adjustable back focal distance |
|
Mass |
150 grams (without optics or tripod mounting bracket) |
|
Lens Control |
DC Auto Iris |
|
GPIO Connector |
6-pin GPIO connector for trigger, strobe, and serial I/O. 1 opto-isolated input, 1 opto-isolated output, 2 bi-directional I/O pins |
|
Camera Protocols |
GigE Vision™, Onvif™, http, rtsp, udp, SMPTE 292M, SMPTE 424M |
|
Camera Control |
via web server, FlyCap SDK, third party software utilizing GigE Vision, Onvif, or RTSP |
|
Power Requirements |
8 to 30 V, less than 6 W at 12 V, via 4-pin power connector |
|
Camera Updates |
In-field firmware updates via Ethernet interface
|
|
Emissions Compliance |
CE, FCC, RoHS |
|
Operating Temperature |
Commercial grade electronics rated from 0° to 45° C |
|
Operating Relative Humidity |
20 to 90% (no condensation) |
|
Storage Temperature |
-30° to 60° C |
|
Ventilation Requirements |
Natural Convection |
|
Warranty |
2 year |
Development Kit Contents
The Zebra2 does not offer a software development kit.
Emissions and RoHS Compliance
FCC / CE Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
RoHS / WEEE Compliance
This product is RoHS and WEEE compliant.
Related Articles
Knowledge Base Articles
Click here to view Zebra2 knowledge base articles
| Part Number |
Description |
Availability |
| ZBR2-POGEHD-20S4C-CS |
1624x1224 Sony ICX274 CCD Global Shutter, Color |
Coming Soon |
| ZBR2-POGEHD-32S2C-CS |
2080x1552 Sony IMX036 CMOS Rolling Shutter with Global Reset, Color |
Coming Soon |
| ZBR2-POGEHD-50S5C-CS |
2448 x 2048 Sony ICX625 CCD Global Shutter, Color |
Coming Soon |
|
